 |
 |
 |
 |
 |
TO-BE with welded feet
It is possible to have TO-BE radiators with feet welded to the
structure, of the same colour of the radiator. This solution
is ideal for radiators particularly long but with small height:
both from an aesthetical and a functional point of view, feet are the better
solution in installation.
TO-BE integrated
|
It is possible to have TO-BE radiators with integrated Oventrop valve inserted in the manifold during production. A great advantage of the integrated solution is the perfect adaptation of the radiator dimensions to the place in which it is installed, because the tubes are positioned under the radiator and not on its side. This solution also allows the operator to regulate the volume of warm water in entrance according to the radiator size. |
With Oventrop valve it is possible to use the most common thermostatic heads, and in this way the final user can regulate each single radiator at the desired temperature independently from the other radiators of the same heating system. Thermostatic heads are not included in standard fittings.
TO-BE integrated is available in all sizes of standard TO-BE, with the same performances as regards heat outputs.
The drawing below shows the positions for the valve (for clearness also the thermostatic head has been drawn ), at top of the radiator. A diffusion tube has been inserted.
are certificated according to European rules
